Installation Guide

4
Aerada 1000/1100 Series Installation
9/1/2016
Bradley • 215-1628 Rev. C; ECN 16-02-002
15 sec.
Start-Up Operation
Before startup operation, be sure:
• Faucet is mounted
• Water supply is on
• Water supply lines are flushed properly
• For AC faucets, power outlet is installed.
1
Fully open supply valves.
2
Remove all items from sink.
3
Remove protective covering from sensor.
4
Wait for 15 seconds for the faucet to calibrate to its
environment. After 15 seconds, the faucet it now
activated.
Test Function
1
Hold hand in front of sensor. Water should start
to flow.
CAUTION Hot water may burn skin. Hold
hand carefully under water and
remove quickly.
2
For faucets with external mixer, turn mixer
handle from cold to warm. Water temperature
should increase.
3
Remove hand. Water should stop flowing.