Installation Guide

8
Aerada 1000/1100 Series Installation
9/1/2016
Bradley • 215-1628 Rev. C; ECN 16-02-002
Operating Modes Description
Cleaning Mode The faucet is inactive for 90 seconds.
Normal Mode The faucet is activated if it senses a hand presence. This is the default operating mode of the
faucet.
Metering Mode (10 s) The faucet will shut off after 10 seconds regardless of hand presence detected.
Scrub Mode (60 s) The faucet will shut off 60 seconds after the detection of the last hand presence.
Scrub Mode (180 s) The faucet will shut off 180 seconds after the detection of the last hand presence.
Sensor Range Adjustment Change the detection distance of the infrared sensor. The default sensor range is
approximately 1” beyond the spout.
Reset All settings will be reset to original factory settings.
In order to set the operating modes, the faucet needs to be placed into "Manual Setting" mode. At this time,
operating modes can be changed within the next 30 minutes.
The following is a functional diagram to show the different settings available for manual faucet adjustment. See
detailed instructions on pages 5 through 7.
Function Diagram of Operating Modes
Modes Water Pulses in Second(s)
5 4 1 4 1 4 1 4 1 4 1
Cleaning Mode
Normal Mode
Metering Mode (10 seconds)
Scrub Mode (60 seconds)
Scrub Mode (180 seconds)
Sensor Range Adjustment
Faucet Adjustments
Operating modes and sensor ranges can be adjusted with a manual operation through the infrared sensor.
Faucet adjustment operations apply to all models.
Operating Modes
Water is Off
Water is On