Installation Guide

SafeCare
™
Shower Valve
Equa-Flo HD Pressure Balancing Valve
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 1 3/15/2013
This information is subject to change without notice.
Bradley_ShowerValve_S59-1005SR
Engineer's Approval
(mm)Dimensions
• Ligature-Resistant Handle
• Durable Construction from Brass and Stainless Steel
• Durable Stainless Steel Balancing Piston
• Checkstops on Inlets
• 1/2" Diameter Chrome-Plated Brass Stem
• ASSE 1016 Certified
• Factory Assembled and Tested
• Easy Installation and Serviceability
Specification
Pressure balancing valves automatically compensate for changes in supply pressure
keeping shower temperature constant.
Operation
Control handle rotates from off through cold to hot. Volume is constant. Water temperature
is maintained by a stainless steel piston which instantly detects changes in supply
pressures and automatically adjusts discharge ports keeping shower temperature constant
to within 2° of desired setting.
Maximum delivery temperature is controlled by an adjustable limit stop which restricts the
amount of hot water entering the valve. Should either hot or cold supply fail, the valve will
shut off so as not to produce a spray or significant flow through showerhead.
Valve Specifications
Maximum Operating Pressure
125 PSI (860 kPA)
Connections
1/2" NPT
Flow Capacities – GPM (L/Min)
Model
Min
Flow
Pressure Drop – PSI (Bar)
5
(.5)
10
(1.0)
15
(1.5)
20
(2.0)
30
(2.5)
45
(3.0)
60
(4.0)
S59-1005SR
Suffix HDSR
0.5
(2.0)
2.0
(8.5)
2.5
(11.5)
3.0
(14.0)
3.5
(16.0)
4.5
(18.0)
5.5
(20.0)
6.0
(22.5)
HOT COLD
4-1/2" (114) Diameter Wall Opening Required
Non-cancelable, non-returnable
6-1/2" (165)
With Stops
2-1/2" (64)
Without
Stops
1016
1-1/2"
(38)
1-1/2"
(38)
48"
(1219)
Above
Finished
Floor
2-1/4"
(56)
4"
(103)
4-5/8"
(119)
1/2" NPT Inlets
and Outlets
1/2" NPT
Pipe Plug
(By Installer)