Datasheet
SPC International, Atealaan 71, I.Z. Klein Gent, B-2200 Herentals,Belgium
Tel +32(0)14 321855 Fax +32(0)14 320440 www.bradyeurope.com
GENERAL PRODUCT SPECIFICATION
Item No.
MRO100-E
Date
16-6-2017
Replaces
4-11-11
No. Pages
1
Product Description:
Style
Pads ; perforated on centerline for dividing in half for smaller applications
Item Size (each)
41 cm x 51 cm
Color
Gray
Composition
Polypropylene >98%, Surfactant < 1.0%, color pigment < 1.0 %
Structure
96% natural white meltblown nonwoven fibers(<10 microns)
4% white spunbond nonwoven coverstock(<15-30 microns)
Technology
Meltblown + spunbond
Absorbency
Universal (Hydrophilic + Oleophilic)
Bonding
Bonded (staggered pattern) + Mechanical entanglement
Intended Application
Low -Lint Chemical Resistant Sorbent for Water, Oil, or Solvent Base Liquids
Absorbency Capacity
110 l per bale (saturated; medium viscosity-12.5x)
Packaging Description:
Package configuration
1-Case
Pkg. Weight
8.5 kg (7.6 kg)
Items per Package
100-Pads/Case
Pkg. Dimensions
53 cm x 43 cm x
44 cm (H)
Container type
Carton
Physical Properties;
Parameter
SPC Test Method
Units
Nominal
(+/-)Tolerance
Basis Weight
SPCTM-002A
G/M2
365
36
Caliper
SPCTM-020
mm
5.2
0.5
Absorbency** (med.
Oil)
SPCTM-004B
gL/gS
12.5
2
Tensile Strength
SPCTM-007
daN
20
2
Color
Visual
--------
Gray
per standard
The above properties are “nominal” values used for PROCESS CONTROL when the
product is produced and/or inspected. Performance “nominals” may vary depending
upon the specific application, and/or the environment being applied, stored, or shipped.
** The "Absorbency" Spec and "SPCTM004" test method is based on the protocol of
ASTM F726, using SAE20 non-detergent as the Oil Type, medium viscosity.
Attributes
Product will be free of foreign material contamination, rips, holes, and tears.
Labeling
Each package to be clearly labeled with Company Name, Address, Item No.,
Date, and/or Package Code (Bar Code).
Certification
Make no changes in basic process or composition without notifying customer.
Claims for non-conformance of goods must be made within 60-days of delivery.