Datasheet
Technical Data Sheet
All Purpose Cable Lockout
TDS No. LOTO-3
Effective Date: 10/09/2017
Description:
Design
● Compact, lightweight body made of rugged
isoplast plastic in an ergonomic friendly design
● Superior chemical, corrosion and temperature
resistance properties
● Two types of interchangeable cables:
nonconductive nylon cable or sheathed metal
cable
● Built-in cable loop keeps cable neatly coiled
when stored, also keeps extra cable from
dangling loose and posing a hazard when in
use
● 4 lock holes in handle that will accommodate
most lock shackles and hasps
Material
● Outer Housing made of Glass-filled
Polyurethane polymer; Red (PMS 1805C)
● Handle made of Glass-filled nylon 6/6 (Black)
● Springs and locking cleats made of Stainless
Steel Nonconductive nylon cable (Ø0.125”
[3.2mm])
● Sheathed metal cable with red vinyl coating
Ø0.188” [4.8mm])
● UL Rating of Housings: UL 94 - HB
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline (normal &
premium grade)
85
Trichloroethane 1,1,1
45
Temperature Range
● Housing: -40° to 120°C (-40° to 250°F)
● Nylon Cable: -40° to 90°C (-40° to 200°F)
● Sheathed Cable: -35° to 80°C (-30° to 180°F)
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture (15%
methanol)
70
Water (including seawater)
25
Chemical Resistance
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
All approved chemicals listed are based on the
manufactures specified chemical resistance chart for
plastic material only. All other materials in the device
are made of Stainless steel.
Dimensions
Cable Lengths and Colors
8ft [2.44M], 12ft [3.66M], 16ft [4.88M], 20ft
[6.1M]
“A”
–
6.000” [152.4mm]
“B”
–
1.276” [32.4mm]
“C”
–
0.281” [7.1mm]
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are
for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified
performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady
for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or
based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no
independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this information.