Datasheet

D
3.15”
5.58”
7.13”
10.52”
14.31”
(80mm)
(141.7mm)
(181mm)
(276.2mm)
(363.5mm)
E
2.78”
5.2”
6.75”
10.52”
13.96”
(70.6mm)
(132.3mm)
(171.4mm)
(276.2mm)
(354.5mm)
F
.75”
1.75”
2.5”
3.52
4.11”
(19mm)
(44.5mm)
(63.5mm)
(89.4mm)
(104.5mm)
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document
are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting
specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should
contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product
or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no
independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this information.
Details:
MSDS Information
1. HAZARDS IDENTIFICATION
This product is NOT DANGEROUS and contains no hazardous ingredients
2.  FIRST AID MEASURES/HEALTH INFORMATION PROTECTION
Eye Contact:
Not applicable, product is inert
Ingestion:
Not applicable, first aid is not normally required.
Inhalation:
Not applicable
Skin Contact:
Not applicable, product is inert, except if product is melted use gloves. For hot melted product, immerse in or flush affected area
with water to dissipate heat, then obtain medical attention.
Exposure Limits:
None
Threshold Limits
None
Personal Protection:
None (ambient conditions)
NPCA-HMIS Rating:
Health: 0; Flammability: 1; Reactivity: 0
NFPA-704 Rating:
Health: 0; Flammability: 1; Reactivity: 0
3. FIRE-FIGHTING MEASURES
● Be cautious of hot melted Nylon
● Use water spray to cool fire, exposed surfaces, and to protect personnel
● Isolate product from fire
● Respiratory and eye protection is required for fire fighting personnel
● Extinguish fire with water spray
● Decomposition products under fire conditions: Oxygen-lean conditions may
cause monoxide and irritating smoke
4. ACCIDENTAL RELEASE MEASURES
Land
Recover material and place in suitable container for reuse or for disposal in conformance with local regulations
Water
Recover material and place in suitable container for reuse or for disposal in conformance with local regulations.
5. HANDLING AND STORAGE
5.1 Handling
5.2 Storage
No precautions noted-see local regulation if needed
Storage pressure: Atmospheric
Storage temperature: Ambient, no direct sunlight
6. EXPOSURE CONTROLS/PERSONAL PROTECTION
6.1 Exposure limit values
6.2 Exposure Controls
None
6.2.1 Occupational Exposure Controls
6.2.1.1 Respiratory Protection: Not applicable
6.2.1.2 Hand Protection: Not applicable
6.2.1.3 Eye Protection: Not applicable
6.2.1.4 Skin Protection: Not applicable
6.2.2 Environmental Exposure Controls: No data available
7. PHYSICAL AND CHEMICAL PROPERTIES
General Information
Other Information
8. STABILITY AND REACTIVITY
8.1 Conditions to Avoid
Higher Temperatures and direct sunlight (chemical resistance is excellent)
Highly stable, but temperatures over 480 F may cause degradation
8.2 Materials to Avoid