Datasheet

Technical Data Sheet
Miniature Circuit Breaker Lockout - Pin Out Standard
TDS No. LOTO-1
Effective Date: 10/03/2017
Description:
Design
● Safe and effective method for locking out
miniature circuit breakers
● Require no tools to install! Easily installs with
the aid of a push button
● Recommended to lock with lightweight Brady
Compact Safety Padlocks, and can accept up
to 9/32" shackle diameter
● Made of a durable glass-filled nylon, available
as each or in packs of 6"
Material
● Made of Glass-filled nylon
● Springs made of Stainless Steel
● Color: Outer Housing – Red (PMS 1805C)
● Color: Inner Housing - Black
● UL rating – UL94 – HB Rating
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline (normal &
premium grade)
85
Trichloroethane 1,1,1
45
Temperature Range
Plastic Housings: - 20° to 120°C (0° to 250°F)
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture (15%
methanol)
70
Water (including seawater)
25
Chemical Resistance
All approved chemicals listed are based on the
manufactures specified chemical resistance chart for
plastic material only. All other materials in the device
are made of Stainless steel.
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
Dimensions
“A”
–
1.638” [41.6mm]
“B”
–
0.950” [24.1mm]
“C”
–
0.043” [1.1mm] Max
“D”
–
0.495” [12.6mm]
“E”
–
0.281” [7.1mm]
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document
are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting
specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should
contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product
or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no
independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this information.
Circuit Breaker Cross Reference Guide