Datasheet

3
1. HAZARDS IDENTIFICATION
This product is NOT DANGEROUS and contains no hazardous ingredients.
2. FIRST AID MEASURES/HEALTH INFORMATION /PROTECTION
Eye Contact:
Not applicable, product is inert
Ingestion:
Not applicable, first aid is not normally required.
Inhalation:
Not applicable
Skin Contact:
Not applicable, product is inert, except if product is melted use gloves. For hot melted product, immerse in or flush affected area
with water to dissipate heat, and then obtain medical attention.
Exposure Limits:
None
Threshold Limits
None
Personal Protection:
None (ambient conditions)
NPCA-HMIS Rating:
Health: 0; Flammability: 1; Reactivity: 0
NFPA-704 Rating:
Health: 0; Flammability: 1; Reactivity: 0
3. FIRE-FIGHTING MEASURES
● Be cautious of hot melted Nylon
● Use water spray to cool fire, exposed surfaces, and to protect personnel
● Isolate product from fire
● Respiratory and eye protection is required for fire fighting personnel
● Extinguish fire with water spray
● Decomposition products under fire conditions: Oxygen-lean conditions may cause
monoxide and irritating smoke
4. ACCIDENTAL RELEASE MEASURES
Land
Recover material and place in suitable container for reuse or for disposal in conformance with local regulations.
Water
Recover material and place in suitable container for reuse or for disposal in conformance with local regulations.
5. HANDLING AND STORAGE
5.1 Handling
5.2 Storage
No precautions noted - see local regulation if needed
Storage Pressure: Atmospheric
Storage Temperature: Ambient, no direct sunlight
6. EXPOSURE CONTROLS/PERSONAL PROTECTION
6.1 Exposure Limit Values
6.2 Exposure Controls
None
6.2.1 Occupational Exposure Controls
6.2.1.1 Respiratory Protection: Not applicable
6.2.1.2 Hand Protection: Not applicable
6.2.1.3 Eye Protection: Not applicable
6.2.1.4 Skin Protection: Not applicable
6.2.2 Environmental Exposure Controls: No data available
7. PHYSICAL AND CHEMICAL PROPERTIES
General Information
Other Information
8. STABILITY AND REACTIVITY
8.1 Conditions to Avoid
Higher Temperatures and direct sunlight (chemical resistance is excellent)
Highly stable, but temperatures over 480 F may cause degradation
8.2 Materials to Avoid
No data available
8.3 Hazardous Decomposition Products