Cut Sheet

TechnicalDataSheet

BRADYB736ECONOMYPIPEMARKERSONAROLL

TDSNo.B736

EffectiveDate:11/15/2010

Description:

BradyB736PipeMarkersonaRollareasurfaceprintedfilm,linermountedwithapressuresensitiveadhesive.

Details:

Use:

BradyB736isaneconomypipemarkeridealforuseonclean,drypipes.Eachmarkerhasadiecutdesignwhichenables

eachlabelandarrowtobeappliedintheselectedflowdirections.

AdhesiveType:

Permanentpressuresensitive

SubstrateType:

Plasticfilm

StandardMaterialColors:

Blue,green,redandyellow

StandardLegendColors:

Blackandwhite

Thickness(PSTC33):

Total:0.033in.(0.083mm)

AdhesiveProperties:

AdhesiontoSteel(PSTC1)

15MinuteDwell(Avg.)20oz/in.(21.9N/100mm)

UltimateDwell(72Hrs.)(Avg.)25oz/in.(27.4N/100mm)

Tack(ASTMD2979)(Avg.)674g(6.6N)

AbrasionResistance(Method5306ofU.S.FederalTestMethodStd.No.191A):

CS10wheels,250gwts.

Legendwithstandsupto200cycles.

Gloss(ASTMD523):

60°8095GardnerUnits

MinimumApplicationTemperature:

50°F(10°C)

ServiceTemperature:

40°Fto212°F(40°Cto100°C)

AverageOutdoorDurability:

Upto2years(Averageexpectedoutdoorlifeofproductwilldependonuserdefinitionoffailure,climaticconditionsand

mountingtechniques.)

ChemicalResistance:

PAGE 1
Technical Data Sheet BRADY B736 ECONOMY PIPE MARKERS ON A ROLL TDS No. B736 Effective Date: 11/15/2010 Description: Brady B736 Pipe Markers on a Roll are a surface printed film, liner mounted with a pressure sensitive adhesive. Details: Use: Brady B736 is an economy pipe marker ideal for use on clean, dry pipes. Each marker has a diecut design which enables each label and arrow to be applied in the selected flow directions.
PAGE 2
REAGENT 30% Sulfuric Acid 10% Sulfuric Acid 30% Hydrochloric Acid 10% Hydrochloric Acid Glacial Acetic Acid 5% Acetic Acid 50% Sodium Hydroxide 10% Sodium Hydroxide 10% Ammonia 5% Sodium Hypochlorite Methyl Ethyl Ketone Acetone Toluene 1,1,1 Trichloroethane Methanol Isopropyl Alcohol Heptane Mineral Spirits Turpentine Kerosene Diesel Fuel Gasoline ASTM #3 Oil SAE 20 Oil 10% Sodium Chloride Alconox® Water NE = No Effect F = Failed (affected Sample) 7 DAY IMMERSION NE NE NE NE F NE NE F NE NE F F F NE F F
PAGE 3
assumes no liability in connection with the use of this information. WARRANTY Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it.