Brochure
48
Ball valve lockouts
Order
Reference Description Material
Max. Handle
Thickness (mm)
Max. Valve Handle
Width (mm)
Size valve
lever (mm)
Max. Shackle
Diameter (mm)
Min. Shackle
Clearance (mm)
# of
Holes Quantity
065666* Small Brady Ball Valve Lockout Nylon 7.62 30.48 6 - 25 7.00 25.00 8 1
065692 Small Brady Ball Valve Lockout Steel 6.92 30.48 6 - 25 9.53 19.00 6 1
065669 Large Brady Ball Valve Lockout Steel 12.70 53.34 32 - 76 7.00 19.00 15 1
065693 Large Brady Ball Valve Lockout Steel 12.70 48.26 32 - 76 9.53 19.00 7 1
Brady ball balve lockouts are the ideal tool for securing your quarter-turn
angled ball valves in the OFF position.
• Fits virtually any valve lever up to 76 mm
• Available in 2 sizes
• Service Temperature from -30 °C to 120 °C
Brady ball valve lockout
Perma-mount™ ball valve lockout
These Lockout Devices keep your critical valves ready for correct lockout. Retrofit lockout
devices stay permanently in place at the point of need.
• Eliminate the need to choose and carry the correct devices for each lockout event
• Securely retain the operating handle in the 90° fully-closed position
• Two sizes fit the full range of 1 to 10 cm diameter ball valves
• Designed to withstand a wide range of environmental conditions
Order
Reference Colour
Pipe Diameter
(mm)
Max. Shackle
Diameter (mm)
Min. Shackle
Clearance (mm) Quantity
Small
800110*
Red 14,50 - 52,50 7.24 38.00 1
805847
Blue 14,50 - 52,50 7.24 38.00 1
805848
Green 14,50 - 52,50 7.24 38.00 1
805849
Yellow 14,50 - 52,50 7.24 38.00 1
Large
800111
Red 50.00 - 200.00 7.24 38.00 1
805850
Blue 50.00 - 200.00 7.24 38.00 1
805851
Green 50.00 - 200.00 7.24 38.00 1
805852
Yellow 50.00 - 200.00 7.24 38.00 1
Ball valve lockout
• Small device locks out valves in open and closed position for pipes from 14.50 - 52.50 mm diameter
• Large device locks out valves in closed position for pipes from 50 - 200 mm diameter
• Versatile and easy-to-use
• Made from Ultra-tough Polypropylene
• Service temperature from -20 °C to 80 °C
Versatile and easy-to-use device. The two halves of the device encompass the ball valve
lever to secure it from inadvertent activation of the valve.
Consult the technical
datasheet LOTO-74 on
bradyeurope.com/tds
Consult the technical
datasheet LOTO-22 on
bradyeurope.com/tds
Order
Reference Description Material
Width
(mm)
Height
(mm) Quantity
121541 Perma-mount™ Ball Valve Lockout,
Large size
Metal 92.20 162.80 1
121540 Perma-mount™ Ball Valve Lockout,
Small size
Metal 55.90 108.20 1
Consult the technical
datasheet LOTO-23 on
bradyeurope.com/tds
Order
Reference Description Colour
Height
(mm)
Width
(mm)
Size valve
lever (mm)
Max. Shackle
Diameter (mm)
Min. Shackle
Clearance (mm) Quantity
225340 Non-Conductive Ball
Valve Lockout
Red 125.00 95.00 190 - 250 7.00 20.00 1
Non-conductive ball valve lockout
• Locks quarter-turn ball valves in OFF position
• Made from strong polypropylene plastic, resistant to cracking, abrasion and chemical products
• Resistant to extreme temperature -46 °C to 183 °C
Intuitive and easy to place safety device.
*This product meets the ATEX Equipment Directive.
*This product meets the ATEX Equipment Directive.