Datasheet
Technical Data Sheet
Brady Ball Valve Lockout
TDS No. LOTO-23
Effective Date: 10/09/2017
Description:
Design
● Easy to use, single piece design locks
quarter-turn ball valves in the OFF
position
● Two sizes fit most valves up to 3" in
diameter
● Made from either powder-coated steel or
super-tough nylon
Material
● Polyamide: Nylon 6/6
◌ Color: Pantone 1807
● Steel
◌ Powder Coat: Red
Temperature Range
● Plastic: -20°F to 250°F (-30°C to 120°C)
● Steel: -30°F to 350°F (-35°C to 175°C)
● Powder Coat: -20°F to 200°F (-30°C to
93°C)
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline (normal &
premium grade)
85
Trichloroethane 1,1,1
45
Chemical Resistance
All approved chemicals listed are based on the
manufactures specified chemical resistance chart
for plastic material only.
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture (15%
methanol)
70
Water (including seawater)
25
Dimensions
Plastic
A
-
3.7”
[95mm]
B
-
3.1”
[77mm]
C
-
1.1”
[27mm)
D
-
2.25”
(57mm)
E
-
0.31”
(8mm)
F
-
0.29”
(3.3mm)
Steel
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
Small
Large
A
3.7”[95mm]
6.12”[156mm]
6.12”[156mm]
B
3.1”[77mm]
4.96”[126mm]
4.96”[126mm]
C
N/A
N/A
N/A
D
2.25”[57mm]
3.86”[98mm]
3.86”[98mm]
E
0.31”[8mm]
0.65”[16.5mm]
0.65”[16.5mm]
F
0.38”[3.3mm]
0.29”[7.4mm]
0.38”[3.3mm]