User`s manual

BBP

85 Label Printer

User’s Manual

7-7

Installing Software Upgrades

Upgrade from USB Flash Drive

Use this procedure to upgrade the firmware or software from a USB flash drive

that has the upgrade on it. The system will support only one USB device at a time.

To upgrade software from a USB flash drive :

CAUTION!

Do not interrupt power during an upgrade from a USB flash drive .

1. Connect the USB flash drive to any available USB port on the printer.

2. Press Menu .

3. In the menu list, select More Tools .

4. Select Upgrade from USB drive .

Note: If there are unsaved changes in the currently active file, the system will

prompt you to save the file before continuing with the upgrade. Select Yes, No or

Cancel.

5. At the prompt to continue with the upgrade, select Yes. The printer will go into

upgrade mode and restart after the upgrade is complete.