User`s manual

BBP

85 Label Printer

User’s Manual

8-3

Printer Maintenance

Cleaning the Printer

Cleaning Residue from Printer and Keyboard

Whenever performing any maintenance on the printer, you should also clean any

residue caused by the media.

Materials Required

• Compressed Air Bottle, purchased locally (e.g., HOSA AIR-464 Gear Duster)

• Lint-free Cloth

• Isopropyl Alcohol (99% recommended)

• Safety Glasses

To clean residue from the printer:

CAUTION!

Always wear safety glasses when using compressed air.

1. Remove power and media from the printer (see “Removing Power and Media

from Printer” on page 8-1).

2. With safety glasses on, spray compressed air on any parts of the printer and

keyboard that have built-up residue.

Note: If compressed air is not available, use a lint-free cloth lightly moistened

with isopropyl alcohol and wipe off residue.

3. If necessary, use a moistened, lint-free cloth to clean the keyboard keys.

4. Replace the ribbon and tape.

5. Close all covers and plug in the power cord.