User`s manual

8-6 BBP

85 Label Printer

User’s Manual

Printer Maintenance

Cleaning the Printer

Cleaning the Exit Area

This procedure cleans the exit chute.

Note: You should clean the exit chute after cleaning the sensors. The cleaning

swab may be damaged when cleaning the exit area.

Materials Required

• BBP31 Cleaning Kit (Cat # B31-CCT)

• Isopropyl Alcohol (99% recommended)

To clean the exit chute:

1. If necessary, remove power and media from the printer (see Removing Power

and Media from Printer on page 1).

2. Using a pre-moistened swabs from the cleaning kit with the alcohol and clean

the exit chute [3].

3. Replace the ribbon and tape.

4. Close all covers and plug in the power cord.