User`s manual

BBP
®
85 Label Printer User’s Manual 9-5
Problem Resolution
Ribbon Errors
Ribbon Out (roll reached purple
trailer).
Print job is canceled.
Please remove unfinished print,
replace ribbon, and close printer
cover. Then press Alt+F2 to
advance and shear the tape.
Error Number 58
Ribbon out. Ribbon is at end of
roll and has reached the purple
trailer while actively printing. The
print job is canceled.
Remove the unfinished label.
Replace ribbon and close cover.
Press Feed and Cut keys to
advance and cut tape.
Text too long for more than one
color.
Press any key to continue.
1. Occurs when a continuous
color monochrome ribbon is
installed and the printer detects a
second color in a new area. If the
existing text is already longer than
the supported maximum label
length, user is prompted to
replace the ribbon.
2. Occurs when a continuous
color monochrome ribbon is
installed and a second color is
added to the label. If the existing
text already exceeds the
maximum for multi-color output,
user is prompted to replace the
ribbon.
Note: In both of these examples,
the only way to successfully print
the label is to use monocolor
ribbons and swap them out
between passes.
Replace ribbon.
Problem/Message Cause Corrective Action