User`s manual

C-8 BBP
®
85 Label Printer User’s Manual
Pipe Markers
Create Pipe Marker Labels
6. In the Graphics dialog:
a. Touch the graphic(s) you want to include on the label. A white line appears
around the selected graphic(s) and the total number of selected graphics
immediately updates. A maximum of 4 graphics are allowed.
Note: To deselect a graphic, touch the graphic again.
b. If necessary, press Change Category to choose from a
different set of graphics. You can select graphics from more than one
category.
7. Select Finish.
8. If desired, edit the data by selecting Edit Pipe Marker Data in the
Pipe Marker control panel. Not all fields are editable.
9. Install the correct ribbon/tape as necessary, and print the label.