User`s manual

C-10 BBP
®
85 Label Printer User’s Manual
Pipe Markers
Save, Open or Delete a Pipe Marker Label
Save, Open or Delete a Pipe Marker Label
You can only save, open or delete pipe marker labels from the Pipe Marker
application.
To open the pipe marker application:
1. From the Home page, select Pipe Markers .
- or -
Select More Label Types, then select Pipe Markers
To save a pipe marker:
Note: This procedure assumes that a pipe marker has already been created.
To create a pipe marker, see “Create Pipe Marker Labels” on page C-3.
1. With the pipe marker displayed in the Pipe Marker control panel, select Menu.
2. Select Save File .
3. Select a category, or if desired, create a new category.
4. In the File name field, enter a file name for the pipe marker.
5. Select OK . The pipe marker is saved.
To open an existing pipe marker:
1. From the Pipe Marker control panel, select Open Saved File .
2. In the Open File dialog, select a category.
3. Select a label. The file immediately opens in the pipe marker editor.
4. To edit the pipe marker, select Edit Pipe Marker Data.
To delete a pipe marker:
1. In the Pipe Marker control panel, select Menu.
2. Select Delete File .
3. In the Delete File dialog, select the category where the label is located.
4. Select the label you want to delete.
5. When prompted to delete the file, select Yes. Selecting No will cancel the
operation.