User manual

Printer Setup
Types of Media
26
Y881746 BBP81 User Manual 5/13/08
Types of Media
Your printer can use various types of media:
• Standard media—Most standard media uses an adhesive backing that sticks individual
labels or a continuous length of labels to a liner.
• Tag stock—Tags are usually made from a heavy paper. Tag stock does not have adhesive
or a liner, and it is typically perforated between tags.
• Permasleeve—Heat shrinkable tubing with permanent, legible identification options for
wires and cables.
Table 7 on page 27 describes roll and fanfold media. Roll media is loaded into the printer
while fanfold media may be located outside of the printer.
Brady strongly recommends the use of Brady-brand supplies for continuous high-quality
printing. A wide range of paper, polypropylene, polyester, and vinyl stock has been
specifically engineered to enhance the printing capabilities of the printer and to prevent
premature printhead wear. To view supplies, go to www.bradyid.com/bbp81.
Important • Transponder placement within a label depends on the transponder type and
the printer model. Make sure that you are using the correct “smart” media for your printer.