User's Manual

6
Important: Proper labeling for end-products using
Brady BDC2000 RFID Assembly:
1) When incorporating BRADY BDC2000 PCB into a host device and the FCC & IC
identification numbers are not visible, the outside of host device must display a label
referring to the enclosed certified BDC2000 PCB. Specifically this should display
wording such as “Contains FCC ID: NUC-BDC2000”
“Contains IC: 3287A-BDC2000”
2) The following statement must be placed in the end-device manual:
"This device complies with Part 15 of the FCC Rules and with Industry Canada licence-
exempt RSSs”. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation."
Important: For Canadian guidance for the user manual, all compliance information
needs to be provided in BOTH French and English language.
3) FYI -The label on end-device shall be permanently affixed and shall be readily visible to the
purchaser at the time of purchase. "Permanently affixed" means that the label is etched, engraved,
stamped, indelibly printed, or otherwise permanently marked on a permanently attached part of the
equipment enclosure or on a nameplate of metal, plastic, or other material fastened to the
equipment by welding, riveting, or a permanent adhesive. The label must be designed to last the
expected lifetime of the equipment in the environment in which the equipment may be operated
and must not be readily detachable.