User Manual

Product Description Brady WavePoint™ XE2000 User's Guide

Figure 4-2 Encoder Module

Figure 4-3 Mounting Base and Post

The Encoder Module is the portion of

the XE2000 that reads and writes to

RFID Smart Labels. The Encoder

Module is placed adjacent to the exit

bay of the printer so labels are

encoded as they rest over it after

being printed.

The Encoder Module contains three LEDs to indicate the operation

status of the XE2000 (see Chapter 5 for more information).

The mounting base and post provide the

XE2000 Encoder Module

with a rigid

foundation for use with a thermal transfer

printer. The base is positioned under the

printer and is held in place by a foam

spacer and rubber feet.

The post supports the Encoder Module via

a bolt and adjustment knob located on the

back of the post. The height of the Encoder

Module can be adjusted by loosening the

knob and sliding the module up or down.

The XE2000 can be set up and used to

encode a wide variety of labels simply by

adjusting the Encoder Module’s

position on

the post. For example, the Encoder Module may be placed directly

adjacent to the exit bay of the printer for shorter labels, while longer

labels may require a gap between the module and the exit bay.

Deleted: ¶

Deleted: ,

Deleted: w

capability of

Deleted: a

Deleted: it