User Manual

XE2000 Setup and Positioning Brady WavePoint™ XE2000 User's Guide
22
Copyright © 2000, Brady Worldwide, Inc.
Chapter 5 - XE2000 Setup and Positioning
Setting up the Brady WavePoint™ XE2000 is remarkably simple.
Right out of the box, all you need to do is connect the power and
serial cables, and install the software. Correctly positioning the
XE2000 with respect to your thermal transfer printer—although
equally simple—may require a bit of trial and error.
Following is a summary of the steps necessary to setup and position
the XE2000. Detailed instructions for each step follow later in this
chapter. After completing these steps, you are ready to begin
encoding labels.
Step Brief Summary of Step Page
Setup XE2000
Install software. Connect power and serial
cable.
22
Position XE2000
Position mounting base arm under the
printer. Adjust encoder module vertically
and horizontally.
25
Check LED Display
Determine XE2000 status and optimal
positioning.
27
Position XE2000
For Use with RFID
Smart Labels
Optimize label location. Use the XE2000
Utilities Program to view positioning
options.
28
Test
Test for connectivity and positioning using
the XE2000 Utilities Program.
33
XE2000 Setup
The following sections describe how to set up the XE2000 to work
with your printer and host PC.