User Manual

Brady WavePoint™ XE2000 User's Guide XE2000 Setup and Positioning
Copyright © 2000, Brady Worldwide, Inc.
35
Testing XE2000 Positioning
Once you've confirmed the XE2000 is communicating with the host
PC, load RFID Smart Labels into your thermal transfer printer and
use the same XE2000 Utilities Program to check the positioning of
the XE2000. You will probably need to calibrate the printer (the
procedure for which depends on the specific printer being used).
1. Double-click the XE2000 Utilities Program
icon located on your desktop.
2. Click the Read Labels button located at the
bottom right corner of the XE2000
Utilities Program window.
3. The COMM Port Number dialog is displayed.
Enter the COMM port to which you are connecting and click
OK.
4. When the Reader Output window is displayed, press the
feed button on your printer to send a label through the
printer and over the XE2000.