User Guide
Table Of Contents
- REGISTER YOUR PRINTER
- TECHNICAL ASSISTANCE
- BATTERIES
- 1. On the back of the printer, squeeze the finger tabs located on both sides of the battery compartment door, then swing the battery compartment door up and out. (The door will come off.)
- 2. Insert 6 AA alkaline batteries or the optional BMP21- PLUS-BATT rechargeable battery pack. (Do not use rechargeable AA batteries or Ultimate Lithium AA batteries).
- 3. Re-insert the battery door hinge at the top of the compartment and push down on the battery compartment door, snapping it into place.
- A/C Power
- CHANGING THE LABEL CARTRIDGE
- Lanyard
- KEYPAD
- POWER ON
- DISPLAY SCREEN
- CREATE A LABEL
- Entering Text
- Inserting Text
- Font Size
- Deleting Text
- Clear Data
English
2BMP
®
21-PLUS
A/C Power
1. Insert the round end of the optional adapter cable into
the plug-in port on the left side of the printer.
2. Plug the other end of the cord into an electrical outlet.
CHANGING THE LABEL CARTRIDGE
1. Turn the locking lever to the left to unlock the cartridge.
2. Push the eject button on the back of the printer.
3. Lift the cartridge out of the printer.
4. Place a new cartridge in the cartridge bay and push
down until the cartridge snaps into place.
5. Turn the locking lever up (to the right).
Lanyard
If using a lanyard, attach it at the base
of the printer.
WARNING!
The Lanyard is not a breakaway and
could be a choking hazard!