User Guide
Table Of Contents
- REGISTER YOUR PRINTER
- TECHNICAL ASSISTANCE
- BATTERIES
- 1. On the back of the printer, squeeze the finger tabs located on both sides of the battery compartment door, then swing the battery compartment door up and out. (The door will come off.)
- 2. Insert 6 AA alkaline batteries or the optional BMP21- PLUS-BATT rechargeable battery pack. (Do not use rechargeable AA batteries or Ultimate Lithium AA batteries).
- 3. Re-insert the battery door hinge at the top of the compartment and push down on the battery compartment door, snapping it into place.
- A/C Power
- CHANGING THE LABEL CARTRIDGE
- Lanyard
- KEYPAD
- POWER ON
- DISPLAY SCREEN
- CREATE A LABEL
- Entering Text
- Inserting Text
- Font Size
- Deleting Text
- Clear Data
English
4BMP
®
21-PLUS
For complete instructions on how to use all keys,
functions, and label types, download the BMP
®
21-PLUS
User’s Manual. Go to: www.BradyCorp.com/Global.
POWER ON
1. Press Power to turn the printer on.
DISPLAY SCREEN
CREATE A LABEL
Entering Text
The vertical line is the cursor.
1. Enter text at the position of the cursor.
Note: The width of the label material installed or the
orientation of the text determines how much text fits on
a line. The error message “Cannot fit” displays if the
text line is too long for the label or if the font size is too
large. To correct, add a new line, change the font size,
or delete some of the text.
2. To add a new, blank line for text, press ENTER .
Inserting Text
To insert additional text within a line of text:
1. Using navigation keys, position the cursor at the point
where text should be inserted.
2. Enter the text.
1 Text lines 5 Caps lock (on)
2 Label type 6 Function key indicator
3 Font size 7 Battery life indicator
4 Bold font (on)