User Manual
Table Of Contents
- Table of Contents
- Introduction
- External View
- Power Source
- Media Cartridge
- Power On
- Keypad
- Menus
- Getting Started
- Formatting
- Serialization
- File Management
- Label Types
- Banner Portrait Label Type
- Banner Landscape Label Type
- Fixed Length
- Custom Length (Version 2.0 only)
- Vial
- WireMarker Label Type (BMP®21-PLUS and 2.0 Only)
- Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
- Panel Residential (Version 2.0 Only)
- Flags (BMP®21-PLUS and 2.0 Only)
- Breaker Box (BMP®21-PLUS and 2.0 Only)
- Technical Support Numbers/On-line Help
- Troubleshooting
- Appendix A - Symbols
- Appendix B - Supported ASCII Characters for Barcodes
Power Source
AC Power Adapter
12
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Charging the Lithium Ion Battery Pack
The lithium ion battery pack accessory cannot be charged in the printer. The battery pack must
be removed from the printer and charged using the BMP21-AC AC adapter. To use the printer
while charging the battery, insert 6 AA alkaline batteries in the battery compartment.
Attaching the Adapter to the Battery Pack
1. Insert the round end of the adapter cable into the plug-in port on the lower left side of the
battery pack.
2. Plug the other end of the adapter cord into an electrical outlet.