User Manual
Table Of Contents
- Table of Contents
- Introduction
- External View
- Power Source
- Media Cartridge
- Power On
- Keypad
- Menus
- Getting Started
- Formatting
- Serialization
- File Management
- Label Types
- Banner Portrait Label Type
- Banner Landscape Label Type
- Fixed Length
- Custom Length (Version 2.0 only)
- Vial
- WireMarker Label Type (BMP®21-PLUS and 2.0 Only)
- Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
- Panel Residential (Version 2.0 Only)
- Flags (BMP®21-PLUS and 2.0 Only)
- Breaker Box (BMP®21-PLUS and 2.0 Only)
- Technical Support Numbers/On-line Help
- Troubleshooting
- Appendix A - Symbols
- Appendix B - Supported ASCII Characters for Barcodes
Media Cartridge
Changing the Label Cartridge
14
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Changing the Label Cartridge
If the cartridge is empty, recycle according to local regulations. (See page 15 for more
information on recycling cartridges.)
Store the cartridge in a cool, dry place.
Please note that the cartridge bay contains parts and assemblies that may be
susceptible to damage by Electrostatic Discharge (ESD). When loading or unloading a
cartridge, care must be taken so that devices are not damaged.
1. Turn the locking
lever to the left to
unlock the
cartridge.
2. Push the eject
button on the back
of the printer, then
lift the cartridge out
of the printer.
3. Place a new cartridge in the
cartridge bay and push down until
the cartridge snaps into place.
4. Turn the locking lever up (to the
right).