User Manual
Table Of Contents
- Table of Contents
- Introduction
- External View
- Power Source
- Media Cartridge
- Power On
- Keypad
- Menus
- Getting Started
- Formatting
- Serialization
- File Management
- Label Types
- Banner Portrait Label Type
- Banner Landscape Label Type
- Fixed Length
- Custom Length (Version 2.0 only)
- Vial
- WireMarker Label Type (BMP®21-PLUS and 2.0 Only)
- Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
- Panel Residential (Version 2.0 Only)
- Flags (BMP®21-PLUS and 2.0 Only)
- Breaker Box (BMP®21-PLUS and 2.0 Only)
- Technical Support Numbers/On-line Help
- Troubleshooting
- Appendix A - Symbols
- Appendix B - Supported ASCII Characters for Barcodes
39
Getting Started
Printing a Label
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Printing a Label
To print a label:
1. Press PRINT .
A printing icon displays on the screen indicating that the label is printing. When the icon
disappears, you can cut the label.
2. Squeeze the cutter levers to cut the label.
The label exit chute contains plastic grips that hold the label in place after cutting so it will not
fall off.
3. Gently pull the label away from the label exit chute.
Multi-Print
Multi-Print allows you to print multiple copies of a label file. To print multiple copies:
1. Press MULTI-PRINT .
2. In the Copies: field, enter a numeric value for the number of copies desired OR use left/
right navigation keys to decrease or increase the number of copies.
3. When ready, press Enter .
The label copies will immediately print.