User Manual
Table Of Contents
- Table of Contents
- Introduction
- External View
- Power Source
- Media Cartridge
- Power On
- Keypad
- Menus
- Getting Started
- Formatting
- Serialization
- File Management
- Label Types
- Banner Portrait Label Type
- Banner Landscape Label Type
- Fixed Length
- Custom Length (Version 2.0 only)
- Vial
- WireMarker Label Type (BMP®21-PLUS and 2.0 Only)
- Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
- Panel Residential (Version 2.0 Only)
- Flags (BMP®21-PLUS and 2.0 Only)
- Breaker Box (BMP®21-PLUS and 2.0 Only)
- Technical Support Numbers/On-line Help
- Troubleshooting
- Appendix A - Symbols
- Appendix B - Supported ASCII Characters for Barcodes
52
File Management
Replace (Overwrite) a File
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
5. In the File Name? field, enter a name for the file, then press Enter .
When the file is saved, you are returned to the Editing screen with the saved file still displayed.
To remove the saved file from the screen:
6. Press CLEAR .
Replace (Overwrite) a File
You can only save 12 files on the BMP
®
21-Plus/BMP
®
21-LAB Label Printer. To save another
file, you need to replace (overwrite) one of the previously saved files. To replace, or overwrite,
a file:
1. Press MENU .
2. Navigate to File, then press Enter .
3. Navigate to Save, then press Enter .
4. Navigate to the numbered field containing the file you want to overwrite and press Enter
.
A message displays requesting confirmation on replacing the previous file.