User Manual
Table Of Contents
- Table of Contents
- Introduction
- External View
- Power Source
- Media Cartridge
- Power On
- Keypad
- Menus
- Getting Started
- Formatting
- Serialization
- File Management
- Label Types
- Banner Portrait Label Type
- Banner Landscape Label Type
- Fixed Length
- Custom Length (Version 2.0 only)
- Vial
- WireMarker Label Type (BMP®21-PLUS and 2.0 Only)
- Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
- Panel Residential (Version 2.0 Only)
- Flags (BMP®21-PLUS and 2.0 Only)
- Breaker Box (BMP®21-PLUS and 2.0 Only)
- Technical Support Numbers/On-line Help
- Troubleshooting
- Appendix A - Symbols
- Appendix B - Supported ASCII Characters for Barcodes
55
Label Types
Selecting a Label Type
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Label Types
Label types provide templates that guide and control the layout for label formats and may
require specific media.
The label types available are:
Selecting a Label Type
To select a label type:
1. Press LABEL TYPE .
2. Using navigation keys, choose the desired Label Type, then press Enter .
Note: If the correct media is not installed in the printer, some of the label type
templates will not display in the Label Type menu. For example, if a permasleeve
cartridge is loaded, the wiremarker template will not be available.
For some label types, data fields display to collect information for automatically formatting
the specific label type.
3. Navigate to the different data fields and enter the data requested.
4. When finished, press Enter .
BMP®21-PLUS and
BMP®21-PLUS-Russian Label Printer
The BMP®21-LAB Label Printer
• Banner Portrait
• Banner Landscape
•Fixed Length
• Custom Length
•Vial
•WireMarker
•Terminal Block
• Patch Panel
• Panel-Residential
•Flag
• Breaker Box
The BMP®21-LAB Label Printer is
intended for laboratory environments
and therefore contains only the
following label types.
• Banner Portrait
•Banner Landscape
•Custom Length
•Fixed Length
•Vial