User Manual
Table Of Contents
- Table of Contents
- Introduction
- External View
- Power Source
- Media Cartridge
- Power On
- Keypad
- Menus
- Getting Started
- Formatting
- Serialization
- File Management
- Label Types
- Banner Portrait Label Type
- Banner Landscape Label Type
- Fixed Length
- Custom Length (Version 2.0 only)
- Vial
- WireMarker Label Type (BMP®21-PLUS and 2.0 Only)
- Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
- Panel Residential (Version 2.0 Only)
- Flags (BMP®21-PLUS and 2.0 Only)
- Breaker Box (BMP®21-PLUS and 2.0 Only)
- Technical Support Numbers/On-line Help
- Troubleshooting
- Appendix A - Symbols
- Appendix B - Supported ASCII Characters for Barcodes
57
Banner Landscape Label Type
Selecting a Label Type
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Banner Landscape Label Type
Banner Landscape label type allows you to enter a long text string. Any media can be installed
for Banner Landscape. If a label type is not supported for newly installed media, the label type
automatically switches to Banner Landscape.
To print a long text string (i.e., producing a “banner”):
1. Press LABEL TYPE .
2. Using navigation keys, choose Banner Landscape, then press Enter .
3. Using navigation keys, choose Horizontal Text or Vertical Text, then press Enter .
Note: When using Vertical Text on a Banner Landscape label type, you are limited
to four lines of text and the message “Cannot Fit” displays if each individual line of
text is too long. However, when using Horizontal Text on a Banner Landscape
label, while you are limited to four lines of text, each individual line is unlimited in
length.
4. On the Editing screen, enter the text string.
Banner Landscape label type - text on
screen
Banner Landscape label type - text
printed out