User Manual
Table Of Contents
- Table of Contents
- Introduction
- External View
- Power Source
- Media Cartridge
- Power On
- Keypad
- Menus
- Getting Started
- Formatting
- Serialization
- File Management
- Label Types
- Banner Portrait Label Type
- Banner Landscape Label Type
- Fixed Length
- Custom Length (Version 2.0 only)
- Vial
- WireMarker Label Type (BMP®21-PLUS and 2.0 Only)
- Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
- Panel Residential (Version 2.0 Only)
- Flags (BMP®21-PLUS and 2.0 Only)
- Breaker Box (BMP®21-PLUS and 2.0 Only)
- Technical Support Numbers/On-line Help
- Troubleshooting
- Appendix A - Symbols
- Appendix B - Supported ASCII Characters for Barcodes
60
Vial
Selecting a Label Type
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Vial
The Vial label type can be used with any media except SelfLam or Permasleeve. (If SelfLam
or Permasleeve media is installed, the Vial label type does not display.) The Vial label type
fixes the length of the label based on the vial size selected and formats the data horizontally or
vertically.
To create a label using the Vial label type:
1. Press LABEL TYPE .
2. Navigate to Vial, then press Enter .
3. Navigate to the desired vial size, then press Enter .
4. Select the way you want the data to print on the label - landscape (horizontal) or portrait
(vertical), then press Enter .
5. Enter the data to display on the vial label.
Landscape (horizontal on printed label) Portrait (vertical on printed label)