User Manual
Table Of Contents
- Table of Contents
- Introduction
- External View
- Power Source
- Media Cartridge
- Power On
- Keypad
- Menus
- Getting Started
- Formatting
- Serialization
- File Management
- Label Types
- Banner Portrait Label Type
- Banner Landscape Label Type
- Fixed Length
- Custom Length (Version 2.0 only)
- Vial
- WireMarker Label Type (BMP®21-PLUS and 2.0 Only)
- Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
- Panel Residential (Version 2.0 Only)
- Flags (BMP®21-PLUS and 2.0 Only)
- Breaker Box (BMP®21-PLUS and 2.0 Only)
- Technical Support Numbers/On-line Help
- Troubleshooting
- Appendix A - Symbols
- Appendix B - Supported ASCII Characters for Barcodes
65
Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
Selecting a Label Type
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
To delete the serialization sequence:
10. Press Backspace .
A confirmation message displays.
To delete the entire sequence:
11. Press Enter .
To cancel the deletion:
12. Press Backspace again.
If serialization was turned OFF, the number of terminals (or ports) indicated in Step 3 above,
display in individual areas. The terminal areas display in the upper right corner of the editing
screen.
13. Use the up and down navigation keys to navigate to the first numbered data field and enter
the identifying information for that terminal.
14. When on a terminal number, use the left or right navigation key to toggle to another
terminal number.
Terminal Block editing screen -
Serialization turned OFF
Patch Panel editing screen -
Serialization turned OFF