User Manual
Table Of Contents
- Table of Contents
- Introduction
- External View
- Power Source
- Media Cartridge
- Power On
- Keypad
- Menus
- Getting Started
- Formatting
- Serialization
- File Management
- Label Types
- Banner Portrait Label Type
- Banner Landscape Label Type
- Fixed Length
- Custom Length (Version 2.0 only)
- Vial
- WireMarker Label Type (BMP®21-PLUS and 2.0 Only)
- Terminal Block, Patch Panel (BMP®21-PLUS and 2.0 Only)
- Panel Residential (Version 2.0 Only)
- Flags (BMP®21-PLUS and 2.0 Only)
- Breaker Box (BMP®21-PLUS and 2.0 Only)
- Technical Support Numbers/On-line Help
- Troubleshooting
- Appendix A - Symbols
- Appendix B - Supported ASCII Characters for Barcodes
Menu does not display all label
types.
The BMP
®
21-PLUS/BMP
®
21-
LAB only displays the label types
that will work with the installed
label material (cartridge).
Insert the proper label material
(cartridge) for the labels you want
to produce.
Examples:
• If using Nylon, Vinyl or
Polyester continuous labels, all
labels types will be shown.
• If using Self-Lam labels the only
label types displayed are Banner
Landscape, Fixed Length and
Wire.
• If using Permasleeve labels, the
only label types that will be
shown are Banner Landscape and
Fixed Length.
• Only .75-inch media will work
with 2D barcodes.
Cannot change to a different
language.
Pressed a wrong key while in
language setup.
Reset the language. See page 25 for
information on setting a specific
language.
Datamatrix and/or QR code can’t
be entered.
Label type is set to Banner Portrait. Set label type to Banner Landscape.
Unable to exit screen or feature. Pressing the CLEAR key only
erases data on the screen.
Press the CLEAR key twice to exit
from a feature or screen.
Problem Cause Corrective Action