User Manual

BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
EUROPE
Waste Electrical and Electronic Equipment Directive
In accordance with the European WEEE Directive, this device needs to be
recycled in accordance with local regulations.
RoHS Directive 2011/65/EU
This product is CE marked and complies with the European Union's Directive 2011/65/EU OF
THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
Batteries Directive 2006/66/EC
This product contains a lithium battery. The crossed-out wheeled bin shown
to the left is used to indicate 'separate collection' for all batteries and
accumulators in accordance with European Directive 2006/66/EC. Users
of batteries must not dispose of batteries as unsorted municipal waste. This
Directive determines the framework for the return and recycling of used
batteries and accumulators that are to be collected separately and recycled
at end of life. Please dispose of the printer and battery pack according to
your local regulations.
Notice to Recyclers
To remove the Lithium battery pack:
1. Turn the printer over, open the battery compartment door, and remove the battery pack.
2. Dispose of in accordance with local regulations.
To remove the Lithium battery:
1. Disassemble printer and locate the lithium cell battery located on the main circuit board.
2. Remove the battery from the board, and dispose in accordance with local regulations.