Operator`s manual

27
4.0.3 Quick Test Mode:
Print Test Labels
Pressing the DOWN ARROW key scrolls to the
previous test function.
Pressing the UP ARROW key scrolls to the next
test function.
Pressing the ENTER key will change the selected
test label quantity of 2, 100, 1000, or 9999 (the
‘Configuration Label’ is always one). Holding
down the key scrolls to the desired quantity.
Pressing the ESCAPE key will exit the Quick Test
Mode without printing.
Pressing the TEST key will print the selected test
label at the selected quantity.
Notes: When performing a Quick Test, press or
to abort printing.
The test functions are disabled while processing communications
data.