Operator`s manual

43
Displayed Message Description Condition(s)
The printer is paused
or / offline.
The printer is in a paused
condition.
The print job is being
processed.
Batch status indication,
updated with each label
printed.
READY Mode.
Normal operating mode.
The printer is ready to
receive and process label
formats.
The Present Sensor
option is enabled and a
printed label is
awaiting removal.
A label blocks the
Present Sensor; remove
it to continue printing.
You are now exiting
the menu, but have
made changes to the
settings of the printer.
Pressing ‘ENTER’ will
save these changes; if
not, the printer will
revert to previously
saved settings.
Menu changes have
affected the
configuration of the
printer.
Note: If changes
have been made that
require a printer reset,
the printer will
automatically invoke
that reset.
Normal power-up / soft
reset condition.
Follows the ‘SYSTEM
RESET IN
PROGRESS’ message
after a reset or power-
up.
Normal power-up / soft
reset condition.
Occurs when the user
resets the printer via the
host or Front Panel.
The printer contains an
invalid calibration.
Perform calibration to
remove the condition.
See Section 5.