User guide

4- 8 LOCKOUT-PRO
TM
ENTERPRISE User Guide
Printing Batch Procedures
LOCKOUT-PRO
TM
Graphical Procedure Writing Software lets you print multiple procedures, in a
batch, to a single printer. The list of procedures in the batch is not saved.
Note: To print batch procedures, the print driver and printer must be installed on the user’s
PC.
To add procedures to a batch print:
1. With the application open, select File>Batch Print Procedures. The Batch Print Procedure
window opens with the following options:
• Printer : Defaults to the last printer selected or to the default Windows
®
printer if no printer
has been selected.
• Supply: Click the down arrow to select a different supply (sheet-fed printer only).
• Printer Offset Values (sheet-fed printer only) : If a sheet-fed printer is selected, options for
setting printer offset values and selecting material are displayed:
-
Material : Defaults to the previously-selected material. If never selected, the first
material in the list is the default.
-
Offsets : 0 (both X and Y offsets). If an offset was previously set, the previously-entered
values are used as the default.
•
Location : D efaults to the last selected directory for procedure files, or
to \My Lockout Procedures if no directory has been selected.
• Available Procedures : Shows all available files in the default directory.
• Print List : Empty (default). Displays file path and file name when procedures are added.
•
Copies : 1 (default). Each procedure can have a different number of copies printed.