User guide

5- 22 LOCKOUT-PRO
TM
ENTERPRISE User Guide
To rearrange energy sources:
1. the Procedure Sections panel, click Energy Sources.
- or -
From the Main Menu, select Edit>Energy Sources. The Energy Sources window displays with a
tab for each of the existing energy sources, in the order they will be printed.
2. Click Arrange Energy Sources.
3. In the Arrange Energy Sources window, click to select the step to move, and then click the Up or
Down button to move it. Repeat the procedure until the energy sources are in the order you want.
4. To close the Arrange Energy Sources window, click OK.
5. When finished, click OK. You will return to the main window, where the revisions you made will
display on the procedure.
Note: Click Cancel if you don’t want to keep the revisions. Your changes will be discarded.
To remove an energy source:
1. In the Procedure Sections panel, click Energy Sources.
- or -
From the main menu, select Edit>Energy Sources. The Energy Sources window will open with a
tab for each of the existing energy sources.
2. Click the tab (E-1, H-1, etc.) for the energy source you want to remove.
3. When the information for the energy source displays in the window, click Remove Energy
Source.
4. When prompted, click Yes if you want to delete the energy source, or No if you want to keep it.
Note: If you answer Yes, the energy source and all of its related information will be deleted
from the procedure.
5. When finished, click OK. You will return to the main window, where the revisions you made will
display on the procedure.
Note: Click Cancel if you want to restore the energy source(s) you deleted. Your changes
will be discarded.