User guide

LOCKOUT-PRO

ENTERPRISE User Guide 5-

To revise a lockout application (or release) step:

1. In the Procedure Sections panel, click Lockout Application Steps -or- Lockout Release Steps.

- or -

From the Main Menu, select Edit>Lockout Application Steps -or- Lockout Release Steps. The

Lockout Application (or) Release Steps window displays with a tab for each of the existing steps.

2. Click the tab of the step you want to revise. The details for that step will be displayed in the

window.

3. Make any changes you want to the information on the screen, using the details outlined in the

procedure “To add a lockout application OR lockout release step”.

4. When finished, click OK. You will return to the main window, where the changes you made will

display on the procedure.

Note: Click Cancel if you don’t want to add the revisions to your procedure. Your changes

will be discarded.

To rearrange lockout application (or release) steps:

1. In the Procedure Sections panel, click Lockout Application Steps -or- Lockout Release Steps.

- or -

From the Main Menu, select Edit>Lockout Application Steps -or- Lockout Release Steps.

The Lockout Application -or- Release Steps window displays with a tab for each of the existing

steps, displayed in the order they will print.

2. Click Arrange Lockout Application (or Release) Steps.

3. In the Arrange Energy Sources window, click to select the step to move, and then click the Up or

Down button to move it. Repeat the procedure until the steps are in the order you want.

Note: The original number for each step will remain on the list and the tab until you return

to the Arrange Lockout Application -or- Release Steps window, where the steps will display

in their new order.

4. When finished with the Arrange Energy Sources window, click OK. You will return to the main

window, where the changes you made will display on the procedure.

Note: Click Cancel if you don’t want to use the rearranged order of steps. Your changes

will be discarded.