User guide

7- 10 LOCKOUT-PRO
TM
ENTERPRISE User Guide
Change Controls & Methods Defaults
To add a control and its method to the default list:
1. In the Set Defaults window, select the Basic Data tab.
2. In the Controls section, click New.
3. In the Add/Edit Controls window, enter the name of the control in the Name box.
4. In the Text box, enter the description of the method used to apply the control, just as you want it to
display on the procedure.
5. Click OK to add the control and return to the Set Defaults window, where the control will be added
to the list.
6. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
To modify a control and/or method on the default list:
1. In the Set Defaults window, select the Basic Data tab.
2. In the Controls section, click the control you want to edit, then click Edit.
3. In the Add/Edit Controls window, enter your changes to either or both the name of the control and
the description of its method.
4. Click OK to save the changes and return to the Set Defaults window.
5. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
To remove a control from the default list:
1. In the Set Defaults window, select the Basic Data tab.
2. In the Controls section, click the control on the list that you want to remove.
3. With the control’s name highlighted, click Remove.
Note: If you accidentally remove a control, click Cancel on the Set Defaults window. The
window will close and when you return, the control will be restored.
4. In the Set Defaults window, click OK to save your changes or Cancel to discard them.
Name Text Description of Method
Disconnect Turn Disconnect to the off position and lock out.
Breaker Turn Breaker to the off position and lock out.
Plug Unplug and apply lockout device.
Ball Valve Turn Valve to the off position and lock out.
Globe/Gate Valve Turn Globe/Gate Valve to the off position and lock out.
Dump Valve Turn Dump Valve to the off position and lock out.