Brochure

34
Master Material Index
Brady Material No. Material Finish Colour Temp (°C)
(Tested for 30 days)
Performance
Attributes
Properties & Applications Approval/Compliance
Min. Max.
B-435
Metallised
Polyester
Gloss Silver -40 °C 90 °C
Printable metallised polyester withstands numerous
solvents and variable temperatures. Ideal for serial
and rating plate applications with name-plate quality
and a metal looking finish.
UL Recognised; CSA Accepted
B-437 Polyvinylfluoride Matt White -70 °C 135 °C
Polyvinylfluoride label material with matt finish.
Used in wire and cable identification applications
where self-extinguishing features are required. This
label material utilises an adhesive for heavy-duty
applications and is available in continuous or die-cut
formats. Excellent resistance to water, oil and other
common fluids. Also available in yellow.
MIL-M-87958 Pressure
Sensitive Adhesive Wire
or Cable Marker and
Identification specification
B-439 Vinyl White -70 °C 40 °C
Coloured vinyl material for thermal transfer printing.
Ideal for rating plates, finished product identification,
and general purpose labelling. Also available in black,
blue, green, orange, purple, silver and yellow.
–
B-459 Polyester Matt White -40 °C 100 °C
White polyester thermal transfer printable material
with matt finish. Designed for applications such as
topside of printed circuit boards and rating plates that
utilise high quality/density alphanumerics, barcodes
and graphics.
UL Recognised; CSA Accepted
B-473
Static Dissipative
Polyester
Gloss White -40 °C 120 °C
White Polyester with glossy finish used for printed
circuit board and electronic component post-
process labelling. Surface resistivity values in the
recommended range for dissipative ESD packing
materials.
UL Recognised; CSA
Accepted; Meets surface
resistivity values in the
recommended range for
dissipative ESD packaging
materials as defined by ANSI/
ESD S541-2008 (between 10
4
and 10
11
ohms)
B-483 Polyester Gloss White -40 °C 120 °C
White polyester thermal transfer printable material
with glossy finish and aggressive adhesive specifically
designed for powder coated surfaces.
UL Recognised; CSA Accepted
B-486 Polyester Matt Silver -40 °C 120 °C
Metallized polyester thermal transfer printable
material, ideal for indoor product labeling, asset
tracking and general ID on very rough surfaces.
UL Recognised; CSA Accepted
B-488 Polyester Matt White -40 °C 160 °C
White polyester thermal transfer printable material,
similar to B-423, but with matt finish. Widely used
for component identification, barcoding, asset and
inventory tracking.
UL Recognised; CSA Accepted
B-489 Polyester Matt White -40 °C 120 °C
White polyester thermal transfer printable material,
similar to B-483, but with matt finish.Agressive
adhesive specifically designed for powder coated
surfaces.
UL Recognised; CSA Accepted
B-498 Vinyl Cloth
Semi-
gloss
White -40 °C 80 °C
White vinyl cloth label material with glossy finish. The
adhesive and cloth backing give excellent holding
power, while being repositionable and removing
cleanly.
UL Recognised
B-499 Nylon Cloth Matt White -40 °C 90 °C
Nylon cloth material with matt finish. The adhesive
allows labelling in environments with heat, cold, oil
and dirt. Also available in yellow.
UL Recognised; CSA
Accepted; Halogen Free
(DIN VDE 0472/part 815)
B-642 Polyvinylfluoride Matt
White/
Transparent
-70 °C 120 °C
Applications requiring self-extinguishing identification.
Self-laminating, wire, cable and laboratory vial
marking. Excellent abrasion and smudge resistance.
–
B-717 Polyimide Gloss White -70 °C 300 °C
White polyimide material with glossy finish and
ultra-durable adhesive. Used in printed circuit board
and electronic component pre-process labelling.
Designed for use with extreme wash protocol and
cleaning chemicals. Surface resistivity values in the
recommended range for dissipative ESD packing
materials.
UL Recognised ; Meets the
requirements ofANSI/ESD
S541-2008(between 10
4
and
10
11
ohms) for dissipative ESD
packaging materials; Meets
the performance requirements
ofMIL-STD-202G, Method
215K
B-718 Polyimide Gloss White -70 °C 300 °C
White polyimide material, low profile (1 mil thickness),
with glossy finish and ultra-durable adhesive. Used
in printed circuit board and electronic component
pre-process labelling. Designed for use with extreme
wash protocol and cleaning chemicals. Surface
resistivity values in the recommended range for
dissipative ESD packing materials.
UL Recognised ; Meets the
requirements ofANSI/ESD
S541-2008(between 10
4
and
10
11
ohms) for dissipative ESD
packaging materials; Meets
the performance requirements
ofMIL-STD-202G, Method
215K