Brochure

www.bradyeurope.com
35
Master Material Index
Brady Material No. Material Finish Colour Temp (°C)
(Tested for 30 days)
Performance
Attributes
Properties & Applications Approval/Compliance
Min. Max.
B-719 Polyimide Matt White -70 °C 300 °C
White polyimide material with matt finish and
ultra-durable adhesive. Used in printed circuit board
and electronic component pre-process labelling.
Designed for use with extreme wash protocol and
cleaning chemicals. Surface resistivity values in the
recommended range for dissipative ESD packing
materials.
UL Recognised ; Meets the
requirements ofANSI/ESD
S541-2008(between 10
4
and
10
11
ohms) for dissipative ESD
packaging materials; Meets
the performance requirements
ofMIL-STD-202G, Method
215K
B-724 Polyimide Matt Amber -70 °C 330 °C
Amber polyimide material with matt finish and ultra-
durable adhesive. Used in printed circuit board and
electronic component pre-process labelling. Designed
for use with extreme wash protocol and cleaning
chemicals.
Meets the performance
requirements of MIL -STD-
202G, Notice 12, Method
215K; Meets the requirments
of SAE AS81531 Marking of
Electrical Insulating Material
B-727 Polyimide Gloss White -70 °C 300 °C
White polyimide material with glossy finish and ultra-
durable adhesive. Used in printed circuit board and
electronic component pre-process labelling. Designed
for use with extreme wash protocol and cleaning
chemicals.
UL Recognised; Meets the
performance requirements of
MIL -STD-202G, Notice 12,
Method 215K; Dibutyltin and
Dioctyltin free.
B-7351
Tamper-resistant
Vinyl
Matt White -40 °C 80 °C
White vinyl material with matt finish. Tamper evident
material fractures to show signs of product tampering
and prevent one-piece removal.
–
B-7546
Tamper-evident
Polyester
Gloss White -40 °C 100 °C
White polyester material with glossy finish. Leaves a
“VOID” footprint on the surface. The adhesive does
not allow for repositioning to prevent it from being
reused.
UL Recognised; CSA Accepted
B-7551 Polyester Matt Clear -20 °C 70 °C –
B-7576
Tamper-evident
Metallised
Polyester
Matt Silver -70 °C 100 °C
Metallised polyester material with matt finish. Leaves
a “VOID” footprint on the surface when removed; the
pattern also appears on the top of the label to prevent
it from being reused.
UL Recognised
B-7593
Polyethylene
Foam Laminate
Polyester
Gloss White -40 °C 100 °C
Thermal transfer printable raised panel labels.
Designed to make legend plate creation quick,
less expensive, and hassle free! Use for electrical
components, electrical cabinets, push buttons, patch
panels, and any other applications you can imagine.
This material can also be used for rating and serial
plates using alphanumerics that require name plate
quality. Also available in black, green, red, silver and
yellow
–
B-7597 Polyethylene Tag Matt White -40 °C 100 °C
Polyethylene tag material. Resists tearing and the
topcoat resists smudging and abrasion. Halogen free
material. Also available in yellow.
Halogen Free (DIN VDE 0472/
part 815)
B-7599 Polyethylene Tag Matt Yellow -40 °C 50 °C
White polyethylene tag material. Rapido™
Wiremarking Sleeves are fast and easy to apply.
Simply squeeze
the edges of the material together, thread your wire
through the holes and pull away the wire to release
the marker.
–
B-7641
Heat-shrink
Polyolefin Sleeve
Matt White -70 °C 110 °C
2:1 ratio heat shrinkable, zero halogen wire marking
sleeves. The wire marking sleeves offer outstanding
fire safety properties and minimal smoke emission.
Also available in yellow.
BS-6853 (1999) Vehicle
Category 1A; EN-45545-2,
requirement 24, Vehicle
Category HL3; Zero Halogen
B-7643
Thermoplastic
Polyether
Polyurethane
Matt White -40 °C 90 °C
Thermal transfer and dot matrix printable wire
and cable bundle tag for harsh environments. Low
halogen material. Also available in black, orange, red
and yellow.
Halogen free per IEC 61249-
2-21 (2003-11), Adherence:
SAE-AS81531-1998, Flame
retardant: MIL-STD-202G
B-7644
Polypropylene
Tag with
Polyester
Overlaminate
Gloss Yellow -70 °C 150 °C
Laminate carrier for cable identification with strip to
laminate text label. The carrier is to be fixed with 2
cable ties directly on the cables and wires.
–
B-7645
Polypropylene
Tag with
Polyester
Overlaminate
Gloss Yellow -70 °C 150 °C
Self-sealing tags for identification of material in tough
environments, including valves, instruments, motors
and other industrial components. Laminat™ tags can
be delivered with a stainless steel reinforcement ring.
–
B-7696 Vinyl Tag Gloss White -40 °C 70 °C
Brady DuraSleeve
®
printable inserts create a durable
legend. The rigid construction of the DuraSleeve
wire marking system provides inserts that can easily
be inserted into a clean carrier. The legend can be
changed before or after termination. Also available
in yellow.
UL94V0