Datasheet
33
Y37455-F
TLS2200 / TLS PC LINK
E
LECTRONIC
A
PPLICATION
L
ABELS
Tamper-Resistant White Vinyl (B-351), Tamper-Resistant Silver Vinyl (B-352)
Tamper-Evident White Polyester (B-7546), Tamper-Evident Metallized Polyester (B-7576)
Label Dimensions Maximum Characters Maximum Lines Of
Surface PartLabels A B Per Line For Font: Text For Font:
Suitability Number Per Roll Inch (mm) Inch (mm) 2 7 10 2 7 10
●
PTL-17-351 500 1.00 (25.40) 0.50 (12.70) 24 10 7 5 2 1
●
PTL-17-352 500 1.00 (25.40) 0.50 (12.70) 24 10 7 5 2 1
●
PTL-17-7546 500 1.00 (25.40) 0.50 (12.70) 24 10 7 5 2 1
●
PTL-17-7576 500 1.00 (25.40) 0.50 (12.70) 24 10 7 5 2 1
●
PTL-20-351 100 2.00 (50.80) 1.00 (25.40) 46 19 13 10 5 3
●
PTL-20-352 100 2.00 (50.80) 1.00 (25.40) 46 19 13 10 5 3
●
PTL-20-7546 100 2.00 (50.80) 1.00 (25.40) 46 19 13 10 5 3
●
PTL-20-7576 100 2.00 (50.80) 1.00 (25.40) 46 19 13 10 5 3
●
PTL-31-351 250 1.50 (38.10) 1.00 (25.40) 37 15 10 10 5 3
●
PTL-31-352 250 1.50 (38.10) 1.00 (25.40) 37 15 10 10 5 3
●
PTL-31-7546 250 1.50 (38.10) 1.00 (25.40) 37 15 10 10 5 3
●
PTL-31-7576 250 1.50 (38.10) 1.00 (25.40) 37 15 10 10 5 3
●
PTL-37-351 100 3.00 (76.20) 1.90 (48.26) 50 31 21 20 10 6
●
PTL-37-352 100 3.00 (76.20) 1.90 (48.26) 50 31 21 20 10 6
●
PTL-37-7546 100 3.00 (76.20) 1.90 (48.26) 50 31 21 20 10 6
●
PTL-37-7576 100 3.00 (76.20) 1.90 (48.26) 50 31 21 20 10 6
INDUSTRIAL
APPLICATION
LABELS
C
ONTINUED
C
USTOM LABEL OPTIONS
Custom sizes, colors and partially preprinted labels are also available. Contact your Brady Identification
Solutions distributor or Customer Service representative for ordering information.
TAMPER-EVIDENT AND
TAMPER-RESISTANT LABELS
www.tls2200.com
◆ Material suitable for smooth surfaces.
● Material suitable for smooth and textured surfaces.
■ Material suitable for smooth, textured and highly textured surfaces.
Label Dimensions Maximum Characters Maximum Lines Of Maximum Through
Part Labels A B Per Line For Font: Text For Font: Bar Code Hole Technology SMT After
Number Per Roll Inch (mm) Inch (mm) 1 4 6 1 4 6 Characters: Top Bottom Top / Bottom Process
PTL-1-426 750 0.25 (6.35) 0.25 (6.35) 6 3 2 2 1 1 0
●● ● ●
PTL-1-457 750 0.25 (6.35) 0.25 (6.35) 6 3 2 2 1 1 0
●● ● ●
PTL-1-477 750 0.25 (6.35) 0.25 (6.35) 6 3 2 2 1 1 0
●● ● ●
PTL-1-478 750 0.25 (6.35) 0.25 (6.35) 6 3 2 2 1 1 0
●● ● ●
PTL-1-479 750 0.25 (6.35) 0.25 (6.35) 6 3 2 2 1 1 0
●● ● ●
PTL-2-426 100 2.00 (50.80) 0.25 (6.35) 52 30 23 2 1 1 11
●● ● ●
PTL-2-457 100 2.00 (50.80) 0.25 (6.35) 52 30 23 2 1 1 11
●● ● ●
PTL-2-477 100 2.00 (50.80) 0.25 (6.35) 52 30 23 2 1 1 11
●● ● ●
PTL-2-478 100 2.00 (50.80) 0.25 (6.35) 52 30 23 2 1 1 11
●● ● ●
PTL-2-479 100 2.00 (50.80) 0.25 (6.35) 52 30 23 2 1 1 11
●● ● ●
PTL-3-426 500 0.375 (9.52) 0.375 (9.52) 10 5 4 4 2 2 0
●● ● ●
PTL-3-457 500 0.375 (9.52) 0.375 (9.52) 10 5 4 4 2 2 0
●● ● ●
PTL-3-477 500 0.375 (9.52) 0.375 (9.52) 10 5 4 4 2 2 0
●● ● ●
* Any label two inches or larger is rotated on liner.
● Ye s, this material will work with this application.
✖ No, this material does not work with this application.
▲ In extreme high temperatures, testing of these materials is recommended.
High Temperature White Polyimide (B-457)
Static Dissipative Polyimide (B-477, B-478, B-479)
High Temperature Amber Polyimide (B-426)
*
POLYIMIDES
Molten Wave Solder
Reflow
Through Hole Technology Surface Mount Technnology (SMT) After
To p B o t t o m To p or Bottom Process
B-426,
B-457, B-477 ● Ye s ● Ye s ● Ye s ● Ye s
B-478, B-479
B-400, B-422,
B-423, B-428, ▲ Ye s * ✖ No ✖ No ● Ye s
B-430, B-459, B-473
T
HERMAL
T
RANSFER
P
RINTABLE
P
RODUCTS
C
IRCUIT
B
OARD
P
ROCESS
C
HART
* In extreme high temperatures, testing of these materials is recommended.
ELECTRONIC APPLICATION LABELS
Reflow
Molten Wave Solder