User Manual
WavePoint™ Portable RFID Reader/Writer User’s Guide
6
• Plug one end of the 12V DC power adapter into the power port on
the side of the RS-232 connector that is plugged into the host PC
port. (See Figure 1.)
• Plug the other end of the adapter into an outlet.
CAUTION: Make sure the outlet is
grounded.
Step 3. Install WavePoint Configuration Software
WavePoint Configuration Software is a Windows
® based configuration
software that allows you to use a PC to customize the operation of the wand.
NOTE: WavePoint Configuration Software should not be
confused with your label design/creation software application.
To install the software,
• Insert the WavePoint
TM
Configuration Utility CD into your PC’s
CDROM drive.
• If the CD does not start automatically,
• On your Windows taskbar, click on StartÆRun.
• Browse to your CDROM drive.
• Click on Wavepoint.exe, and click Open.
• Follow the prompts on your screen to install the WavePoint
TM
Configuration Utility.