User Manual

WavePoint™ Portable RFID Reader/Writer User’s Guide
10
Serial Port Output
Tag Read
Data Format
xTdata{CR}{LF}
Item Description
x Number defining the Tag Type if Header is turned on. See
Tag Types below.
T Character ‘T’ used as a delimiter between tag type and data
if Header is turned on.
Data S/N Data: Two hex characters per byte. Therefore, a 40-bit
S/N will be sent as 10 hex characters.R/W Data: One byte of
data equal to the exact 8-bit character stored. If ASCII data
is stored, this will be ASCII.
{CR} ASCII Carriage Return Character.
{LF} ASCII Line Feed Character.