Cut Sheet

ManualsBrandsBrady ManualsLockoutsPrinzing Wall Switch Lockout

TechnicalDataSheet

PrinzingWallSwitchLockout

TDSNo.LOTO43

EffectiveDate:11/20/2012

Description:

Design



Chemical °C Chemical °C

Acetone 25 Petroleum 25

Acetone 60 Turpentineoil 25

Chlorine,chlorinewater 25 Turpentinesubstitute(whitespirit) 25

Fuel,engine:Gasoline(normal&

premiumgrade)

85 Trichloroethane1,1,1 45

Lubricationoil:gearoil <120

Lubricatingoil:HDengineoils,

hydraulicoils,transformeroils

<120

Fuel,engine:M15mixture(15%

methanol)

70 Water(includingseawater) 25

Methanol 25

Water(includingseawater),

chlorinated(<0,5mg/l)



Clearplasticlockoutusesexistingwallplate

screwstomount

Madeofstrong,clearpolycarbonate

Patentednonhingedesign

Material

Base,Cover:Polycarbonate

Transparent

ULRating–UL94HB

TemperatureRange

Polycarbonate:40°Cto120°C(40°Fto250°F)

ChemicalResistance

Allapprovedchemicalslistedarebasedonthe

manufacturesspecifiedchemicalresistancechartfor

plasticmaterialonly.

Dimensions



A  4.17”[105.9mm]

B  1.41”[35.8mm]

C  0.31”[8.0mm]

D  0.90”[22.8mm]

E  0.66”[16.8mm]

F  0.13”[3.3mm]



Warranty 

Note:Allvaluesshownareaveragesandshouldnotbeusedforspecificationpurposes.Testdataandtestresultscontainedinthisdocument

areforgeneralinformationonlyandshallnotberelieduponbyBradycustomersfordesignsandspecifications,orbereliedonasmeeting

specifiedperformancecriteria.Customersdesiringtodevelopspecificationsorperformancecriteriaforspecificproductapplicationsshould

contactBradyforfurtherinformation.

Summary of content (3 pages)

PAGE 1
Technical Data Sheet Prinzing Wall Switch Lockout TDS No.
PAGE 2
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties expressed or implied, and assumes no liability in connection with the use of this information.
PAGE 3
Trademarks: Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.