User's Manual

INSTRUCTIONS
DAY/TIME
Installer Guide 6
NOTE: This thermostat ships congured as a 1H/1C conventional
thermostat. Conrm installer settings. See page 11.
UP
UP
5
Attach Thermostat to Sub-Base
3) InsertQuickReferenceCardintoslot
 ontopofthermostat.
1) Lineupthethermostatbodywiththesub-base.
2) Carefullypushthethermostatbodyagainstthe
 sub-baseuntilitsnapsinplace.
Provide Power to Thermostat
R
C
24VAC Power (optional)
4
+
+
• Foroptional24VoltACpower,youmustconnectR and C terminal to the thermostat sub-base.
•Forbatterypower,insertthe2supplied“AA”typealkalinebatteriesintothebatterycompartmentlocated
 intherearhousingofthethermostat.MakesuretopositionthePositive(+)andNegative(-)sidesofthe
 batteriescorrectlywiththe+/-symbolsinthebatterycompartment.
Battery Power