Product Overview

ManualsBrandsBraeburn ManualsEquipment140202

The



brighter



choice

Braeburn Zone

Control Systems

2 Zone Panel 140202

for Residential and Light

Commercial Applications

Braeburn Zone Control Panels feature the latest

in zone controls. Our economical two zone panels

deliver maximum value for all two zone applica-

tions. Equipment and status can be determined

at a glance with the monitoring LEDs built into

the panel. User economy is improved with built in

features such as last zone purge and economical

opposite mode calling.

Quick and Easy Installation

Braeburn zone panels are designed with the

features that customers demand: easy installa-

tion, at-a-glance status, quick and reliable wiring

terminals–all in an attractive six inch by six inch

panel. Braeburn, your best source for zoning.

Product Features and Beneﬁ ts

• Compact 6” x 6” foot print maintains system appearance

• Suitable for residential and light commercial applications

• Can be used with conventional four or ﬁ ve wire thermostats

• Quick connect terminals speed installation and reliability

• Compatible with electric, gas, oil and heat pump equipment

• Controls 2 heating and 1 cooling stage

• Emergency heat switch with remote terminals for total heat

pump control

• Fan purge into last calling zone for improved energy efﬁ ciency

• The value choice in 2 zone panels

Speciﬁ cations

Panel Power 4 VA maximum (3.5 VA typical) for panel

System Power 4 VA (Zone Panel) + 1.0 VA per thermostat plus

damper requirements, not to exceed 35 VA

Protection Electronic self resetting current limiting

Equipment Relay driven 2A at 24 VAC

Zone Damper Compatible with power open/power close, spring

Control open/power close and spring close/power

open dampers

Indicators (6) Power OK, status, equipment Rh, Rc,

Damper 1 PO, PC; Damper 2 PO, PC

Switches Non HP/HP, dual fuel no/yes, reversing valve B

active/O active, fan control plenum/system,

opposite mode call timer 20/15, 2nd stage lockout

none/active, priority all/zone 1

Terminals Rh, Rc, Y1, G, W1/E/W3, W2/O-B, C, E-Heat; panel

power (2) and R, Y, G, W, C, PO, C, PC for each zone

Toll-Free 866.268.5599 (U.S.) +1.630.844.1968 (Outside the U.S.) www.braeburnonline.com

Summary of content (2 pages)

PAGE 1
2 Zone Panel 140202 for Residential and Light Commercial Applications Braeburn Zone Control Systems Braeburn Zone Control Panels feature the latest in zone controls. Our economical two zone panels deliver maximum value for all two zone applications. Equipment and status can be determined at a glance with the monitoring LEDs built into the panel. User economy is improved with built in features such as last zone purge and economical opposite mode calling.
PAGE 2
Braeburn Zone Control Systems 2 Zone Panel 140202, for Residential and Light Commercial Applications Architectural Specifications The fully automatic zone panel shall be Braeburn model number 140202 6.00” high x 6.00” wide x 1.25” deep, powered from 24 Volts AC. In the event of a power failure, the unit shall retain all configuration settings.