Product Overview

The



brighter



choice

Braeburn Zone

Control Systems

Static Pressure Control

149020, for Residential

and Light Commercial

Applications

Braeburn Static Pressure Controls are designed

to control HVAC system bypass dampers. This

complete kit comes with a deluxe plated control,

relay, pressure pickup, and a length of tubing. In-

stalls with round and rectangular PO/PC dampers

to economically control system bypass pressure.

Product Features and Beneﬁts

• Suitable for residential and light commercial applications

• Supplied with end of cycle relay to maintain open bypass

when no fan calls occur.

• Field adjustable to match bypass to all calling zone

combinations

• Integrated mounting brackets and sense tubing ttings

allow for easy installation

Speciﬁcations

Mounting Mount vertically on low vibration surface

with inlet tubes pointing sideways or down

Set Point 0.05 to 2.0 inches w.c.

Range

Operating 40˚ F to 180˚ F

Temp.

Rating 300 VA at 115 to 277 VAC SPDT

Contacts

Toll-Free 866.268.5599 (U.S.) +1.630.844.1968 (Outside the U.S.) www.braeburnonline.com

PAGE 1
Static Pressure Control 149020, for Residential and Light Commercial Applications Braeburn Zone Control Systems Braeburn Static Pressure Controls are designed to control HVAC system bypass dampers. This complete kit comes with a deluxe plated control, relay, pressure pickup, and a length of tubing. Installs with round and rectangular PO/PC dampers to economically control system bypass pressure.
PAGE 2
Braeburn Zone Control Systems Static Pressure Control 149020 Quick and Easy Installation The Braeburn static pressure controller is easy to install with simple set-up. Ensure all zones are calling and fan is on highest speed. Turn SPC set screw clockwise until damper is running closed. Turn set screw counter clockwise until damper starts to open. Make final adjustment so damper is lightly closed when all zones are calling. Wire end of cycle relay to maintain open bypass when no fan is calling. See figure 1.