® Programmable Touchscreen Thermostats 6100 For 1 Heat / 1 Cool Systems 6300 For Systems Up to 4 Heat / 2 Cool 6400 For Systems Up to 4 Heat / 2 Cool with Humidification Control Read all instructions before proceeding Store this manual for future reference Attention To prevent damage to the thermostat, never use a sharp instrument to press the touchscreen keys. Always press keys with your fingers.
Contents 1 About Your Thermostat Thermostat Features ................................................ 3 Quick Reference - Thermostat and Display ............... 4 Quick Reference - Thermostat TouchPadsTM.............. 6 2 Setting User Options Accessing User Options ............................................8 Table of User Options ............................................... 9 Service Monitors (Filter, UV and Humidifier Pad) ........ 10 Extended Hold Time Period .....................................
Congratulations! You are in control of one of the easiest-to-use touchscreen thermostats on the market today. This thermostat has been designed to provide you with years of reliable performance and comfort control. Features • SpeedBar® technology simplifies programming and setting changes. • SpeedSet™ programming gives you the option of programming all 7 days at once. • Convenient HOLD feature lets you override the program schedule. • Large 12 sq. in. bright blue backlit display is easy to read.
1 About Your Thermostat Attention To prevent damage to the thermostat, never use a sharp instrument to press the touchscreen keys. Always press keys with your fingers.
Thermostat Display 1 Room Temperature....................... .Displays the current room temperature 2 Lock Mode Indicator . .................. .Indicates if the thermostat is locked 3 Set Temperature........................... .Displays the current set point temperature 4 Humidity Indicator (6400 only)..... .Indicates when there is a call for humidity 5 Fan Indicator................................. .Indicates when the system fan is running 6 Service Indicators . ....................
1 About Your Thermostat Attention To prevent damage to the thermostat, never use a sharp instrument to press the touchscreen keys. Always press keys with your fingers.
Thermostat TouchPadsTM NOTE: Thermostat TouchPads are located on the left, right and bottom portions of the display screen. They are the “touch sensitive” segments used to adjust your thermostat. Depending on equipment installed, all touchpads may not show. SYSTEM..... Selects AUTO (Heat/Cool), COOL, OFF HEAT or EMER (Emergency Heat) FAN............ Selects AUTO, ON, CIRC (Circulation) and PROG (Program) fan modes PROG......... Selects programming mode or press for 3 seconds to select SpeedSet™ mode HOLD...
2 Setting User Options Accessing User Options User options allow you to customize some of your thermostat’s features. The default user options are compatible with most applications, therefore it is not required that you adjust them. To access the User Options menu, touch and hold the CONFIG TouchPad™ for approximately 1 second until the screen changes and displays the first User Option. Press the SpeedBar ® up or down to change the setting for the displayed User Option.
Table of User Options NOTE: Some user options may not be available, depending on how your thermostat was configured in the Installer Settings (see Installer Manual). A detailed description of each User Option follows this table. No. User Options Factory Default Setting Options Comments Pg. 1 Filter Service OFF OFF Monitor 30, 60, 90, 120, 180, 365 Disables filter service monitor feature.
Detailed Explanation of User Options: Service Monitors (Filter, UV and Humidifier Pad) User Options 1, 2 and 3 There are three user selectable service monitors that will display reminders for a required air filter, UV bulb or humidifier pad replacement. The SERVICE segment flashes in the display along with FILTER, UV or HUMID. When the service interval has been reached, and required cleaning or replacement has been performed, touch the RETURN TouchPad™ to reset the timer.
Temporary Override Adjustment Limit User Option 5 The Temporary Override Adjustment Limit will limit how much the thermostat can be adjusted from the current set point when the thermostat is used in the programmable mode. This setting will not allow the user to override the temperature past the selected limit amount of 1, 2 or 3 degrees from the current set point. When the user reaches the adjustment limit the screen will flash ADJ. A setting of 0 disables the adjustment limit.
Audible Tone User Option 8 The Audible Tone feature enables or disables a tone you will hear when you touch any of the TouchPads™ or press the SpeedBar®. Select between on and off. 3 Setting Your Program Schedule Setting the Time and Day 1. In normal operating mode, touch the DAY/TIME TouchPad. The display will switch to the day/time setting mode and the hour will be flashing. 2. Press the SpeedBar up or down to adjust the hour, touch NEXT. 3. Press the SpeedBar up or down to adjust the minute, touch NEXT.
Tips Before Setting Your Program Schedule • Make sure your current time and day of the week are set correctly. • When programming, make sure the AM and PM indicators are correct. • Various installer settings such as auto changeover mode, fan lock mode and temperature adjustment limits may affect your programming flexibility.
Energy Saving Programs This thermostat comes pre-programmed with a default energy saving program. The following tables outline the pre-programmed times and temperatures for heating and cooling in each of your 4 daily events (2 events if configured for commercial mode).
Residential 5-2 Day Programming– Weekday/Weekend Factory Settings 4 Event Weekday Weekend MORN Time: 6:00 am Heat: 70˚ F (21˚ C) Cool: 75˚ F (24˚ C) Time: 6:00 am Heat: 70˚ F (21˚ C) Cool: 75˚ F (24˚ C) Time: 8:00 am Heat: 62˚ F (17˚ C) Cool: 83˚ F (28˚ C) Time: 6:00 pm Heat: 70˚ F (21˚ C) Cool: 75˚ F (24˚ C) Time: 10:00 pm Heat: 62˚ F (17˚ C) Cool: 78˚ F (26˚ C) Time: 8:00 am Heat: 70˚ F (21˚ C) Cool: 75˚ F (24˚ C) Time: 6:00 pm Heat: 70˚ F (21˚ C) Cool: 75˚ F (24˚ C) Time: 10:00 pm Heat: 62˚ F (17˚
Programming a 7 Day Residential Schedule The 7 day residential programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 4 event program schedule. Setting All 7 Days at Once (SpeedSetTM) NOTE: Setting all 7 days at once will copy over any previously programmed individual days. 1. Hold the PROG TouchPad™ for 3 seconds. The display will switch to SpeedSet programming mode.
Setting Individual Days (7 Day Residential) 1. Touch the PROG TouchPad™. The display will switch to programming mode. M (Monday) will be displayed and the hour will be flasing. 2. Touch SYSTEM to select HEAT or COOL. 3. Touch DAY/TIME to select the day you would like to program. 4. Press the SpeedBar® up or down to adjust the hour for the MORN (morning) event. Touch NEXT. 5. Press the SpeedBar up or down to adjust the minute for the MORN event. Touch NEXT. 6.
Programming a 5-2 Day Residential Schedule The 5-2 day residential programming mode allows you to program Monday - Friday with one 4 event schedule and then allows you to change Saturday and Sunday with a different 4 event schedule. 1. Touch the PROG TouchPad™. The display will switch to programming mode. The days M, TU, W, TH, and F will be displayed and the hour will be flashing. 2. Touch SYSTEM to select HEAT or COOL. 3. Press the SpeedBar® up or down to adjust the hour for the MORN (morning) event.
Programming a 7 Day Commercial Schedule (Model 6300, 6400) The 7 day commercial programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 2 event program schedule. Setting All 7 Days at Once (SpeedSetTM) NOTE: Setting all 7 days at once will copy over any previously programmed individual days. 1. Hold the PROG TouchPad™ for 3 seconds. The display will switch to SpeedSet programming mode.
Setting Individual Days (7 Day Commercial) 1. Touch the PROG TouchPad™. The display will switch to programming mode. M (Monday) will appear and the hour will flash. 2. Touch SYSTEM to select HEAT or COOL. 3. Touch DAY/TIME to select an individual day. 4. Press the SpeedBar® up or down to adjust the hour for the OCCUPIED event. Touch NEXT. 5. Press the SpeedBar up or down to adjust the minute for the OCCUPIED event. Touch NEXT. 6.
4 Operating Your Thermostat Setting the SYSTEM Control Mode The System Control has 5 modes of operation – AUTO, COOL, OFF, HEAT and EMER. The mode can be selected by touching the SYSTEM TouchPad™ to scroll through the different modes. NOTE: Depending on how your thermostat was configured, some system modes may not be available. AUTO The system will cycle between heating and cooling automatically based on your program set points. AUTO will be displayed with either HEAT or COOL.
Setting the FAN Control Mode The Fan Control has 4 modes of operation – AUTO, ON, CIRC and PROG. The mode can be selected by touching the FAN TouchPad™ to scroll through the different modes. NOTE: Depending on how your thermostat was configured, some fan modes may not be available. AUTO The system fan will run only when your heating or cooling system is running. ON The system fan will run continually.
Setting the Temperature SpeedBar Temporary Adjustment – Press the SpeedBar up or down to adjust the current set temperature. If your thermostat is running in 5-2 or 7 day programmable mode, the set temperature will change back to your original programmed settings when your next scheduled change in temperature occurs. ® Extended Adjustment – Touch the HOLD TouchPad™ so that HOLD appears in the display screen.
Status Indicators Status indicators appear in the display to let you know what part of your system is running. HEAT ON Indicates that your heating system is running. Status Indicator COOL ON Indicates that your cooling system is running. AUX Indicates that the auxiliary stage of heating is running (multi-stage systems only). EMER Indicates that the emergency heating system is running (heat pump systems only). CHECK Indicates that there is a potential problem with your system.
Program Event Indicators Program Event Indicator Program event indicators appear in the display to let you know what part of your current program is active. • In Residential Program Mode, MORN, DAY, EVE or NIGHT will appear. • In Commercial Program Mode, OCCUPIED or UNOCCUPIED will appear. When the program event indicator is flashing, your program has been temporarily bypassed and will resume at the next scheduled event.
5 Additional Operation Features Auto Changeover Mode Auto Changeover mode is a feature enabled/disabled in the Installer Settings (see Installer Manual). If enabled, it is selected by touching the SYSTEM TouchPad™until AUTO HEAT or AUTO COOL appears below the TouchPad. When Auto Changeover mode is enabled and selected, the system automatically switches between heating and cooling when the room temperature meets the programmed heating or cooling set points.
Adaptive Recovery Mode (ARM™) Adaptive Recovery Mode is a feature enabled/disabled in the Installer Settings (See Installer Manual). If enabled, the feature is automatically present while in programmable mode. Adaptive Recovery Mode tries to reach your desired heating or cooling temperature at the time you have set in your current program schedule, after a setback period.
Programmable Fan Mode Programmable Fan Mode is selected by touching FAN until PROG appears below the FAN TouchPadTM. It is only available in programmable mode. Programmable Fan Mode allows the user to run the fan continuously during a selected program event. To use this feature, select fan ON while setting program events. (See “Setting Your Program Schedule”, page 12).
Locking and Unlocking the Thermostat Your 3-digit Lock Code is set in the “User Options” portion of this manual (See “Setting User Options”, page 8 and 11). Once the code is set, the thermostat can be locked or unlocked at any time by entering that code. To lock or unlock the thermostat, touch and hold the CLEAN and CONFIG TouchPads™ together for 5 seconds (Figure 1). The screen will change, displaying 000 and LOCK will be flashing (Figure 2).
If you entered a valid code the thermostat will be locked or unlocked (depending on its previous state). When locked, the word LOCKED appears in the display (Figure 3). If an invalid code is entered the word NO will briefly appear, indicating that an incorrect code was entered (Figure 4).
AC Power Monitor The AC Power Monitor feature is enabled in the Installer Settings (See Installer Manual). If enabled, this feature will automatically be present. If your thermostat was hardwired (power provided from the system with batteries as a backup) then the AC Power Monitor feature will indicate when a loss of power to the thermostat has occurred by displaying NOAC.
Outdoor Remote Sensing Outdoor remote sensing is enabled by installing a Braeburn® remote outdoor sensor. No additional configuration is required. If a Braeburn outdoor remote sensor was installed you will see the OUTDOOR TouchPad™on the right side of the main display screen (Figure 1). To view the outdoor temperature, touch OUTDOOR. The current outdoor temperature will be displayed for 5 seconds (Figure 2).
Humidification and Dehumidification (6400 only) The Braeburn®model 6400 can be used to control a whole house humidifier or dehumidifier. Humidification can be controlled manually from the thermostat or automatically when a Braeburn outdoor remote sensor is installed and configured in the Installer Settings (See Installer Manual). To view the current humidity level at the thermostat, touch the HUMIDITY TouchPad™ (Figure 1).
If humidification and dehumidification are both enabled you will first see the current humidity level along with the humidification set point. Press the SpeedBar® up or down to adjust the humidification set point. Touch HUMIDITY again to display the dehumidification set point. Press the SpeedBar up or down to adjust the dehumidification set point (Figure 3). Touch RETURN.
6 Thermostat Maintenance Screen Cleaning To access the screen cleaning mode hold the CLEAN TouchPad™ for 3 seconds (Figure 1). The screen will display a countdown timer for 30 seconds (Figure 2). During this time the screen will be locked and you may proceed with cleaning the screen. After 30 seconds the display will return to normal. Never spray any liquid directly on the thermostat. Spray your cleaning liquid on a soft cloth and then proceed to clean the screen with the damp cloth.
Changing the Batteries This thermostat requires two (2) properly installed “AA” alkaline batteries to maintain the thermostat clock and to provide power for the thermostat if 24 volt AC power is not connected. (See Installer Manual). If batteries become low, a battery indicator will appear in the display. You should change your batteries immediately when you see the low battery signal by following these instructions. 1. 2. 3. 4. + + Remove thermostat body by gently pulling it from base.
® Limited Warranty Braeburn Systems LLC warrants each new Braeburn thermostat against any defects that are due to faulty material or workmanship for a period of five years after the original date of purchase by a professional service technician.
® Braeburn Systems LLC 2215 Cornell Avenue • Montgomery, IL 60538 Technical Assistance: www.braeburnonline.com Call us toll-free: 866-268-5599 (U.S.) 630-844-1968 (Outside the U.S.
